Fire Resistant Gypsum Ceiling Panels

threadring1

Gypsum lay-in ceiling panels are tiles which are employed in kitchens or food processing areas, storage areas, warehouses, utility rooms or any other interior or soffit ceilings which can be economical and engaging instead of acoustical in performance. These are backed up by suspended ceiling grids.

These gypsum panels are durable and still provide cleanliness towards the food processing areas. They're usually vinyl laminated to seal out dirt, moisture and odors. The vinyl surfaces are embossed and so are exceptionally stain resistant. They can also withstand repeated washings. Lighting efficiency is maximized simply because they have exceedingly reflective surfaces.

Using the laminated vinyl finish, there's no more requirement for additional finishing. You can definitely an individual so desires, it is recommended use two coats of alkyd or semi-shiny latex enamel. Also, an oil primer can be utilized then coated with oil paint or flat latex. Flat oil paint, two coats, may also be used.

The vinyl gypsum ceiling panels may also be licensed by the Department of Agriculture of the United States of America. The panels are cut easily and will fit into standard suspended ceiling grids. They are easily washable. Lightly rubbing the counter with damp cloth or sponge using soap or detergent will remove dirt and marks. Strong organic solvent cleaners and steel wool usually are not recommended to utilize in washing the boards.

Detergents, 5% Nitric Acid, 10% Ammonia, Ethanol, Oleic Acid, Bleach, 10% Hydrochloric Acid, Carbon Tetrachloride, Baking soda, and Port Wine can have no relation to the gypsum panel even though these chemicals touch the panels all day and night. They are often easily washed with water and soap. 10% Citric Acid, Ketchup, 10% Sodium Hydroxide, Fresh lemon juice, Coffee, Mayonnaise, Tea, Olive oil, Milk, Trisodium Phosphate, Crayon, Mustard, and Vinegar will also have no relation to the gypsum board even if subjected to these chemicals every day and night. Pencil marks will leave an extremely light stain though. Acetone exposure for 24 hours then washed with soap and water gives the panels a shiny finish.

Gypsum lay-in ceiling panels should not be utilized in areas which can be directly encountered with water. They should also stop used in regularly, shower dressing rooms as well as in areas with high humidity or moisture. Backload ought to be limited by 0.5 pounds per square feet. Enclosed or unheated spaces higher than the ceiling panels needs to be properly ventilated. Retainers or hold down clips have to be provided in installations where sudden wind or air pressure change may uplift the panels. Use only an authorized suspended system for exterior use when being installed outdoors.

The gypsum boards come in 1/2" and 5/8" thick type X fire rated. A sort X fire rating implies that the board has a minimum fire rating of 1 hour, which is the requirement of most building codes. It can be more fire resistant plus more expensive than the standard boards. Fire rated boards are often necessary in living room areas as well as in such areas which are susceptible to fires.
For more info about keo dan gach you can check this useful website