Your floors need special protection when undergoing remodeling, during new construction, moving heavy furniture or equipment, and for other events beyond day-to-day use. Protecting flooring is practical and saves money. A spill of paint, the drop of your hammer, a scratch from heavy furniture cost thousands of dollars in replacement and repair costs. This post describes surface protection products for floors so that you can make informed choices on the best product to use for your preferences. Varieties of Protection Packaging:
Floor protection merchandise is commonly packaged as either:
(1) Products by the roll: Included in this are common adhesive films, rolled paper products and rolled textile protection. Protective materials purchased through the roll can be measured thick by mils (e.g., 2.5 mils thick as much as 48 mils thick).
(2) Products through the sheet: Such as corrugated plastic, masonite, and also other rigid protection. Protective materials purchased from the sheet are generally measured in depth by the inch (e.g., 1/4-inch thick) and normally come as 4 feet by 8 feet.
Paper protection would work for many hard surfaces and resilient surfaces but can not work well to shield carpets as it could tear when flexing under footsteps. Paper merchandise is breathable to ensure that glue fumes and cement curing vapors can escape. One disadvantage in paper products since they require tapes to secure these phones flooring and tapes can frequently leave adhesive residue when removed. Common paper protection products include:
Polyethylene (PE) films can be purchased as self adhesive rolled films varying from 2.0 as much as 3.5 mils in depth. They trap any moisture from escaping so they mustn't be suited for any floors which might be curing. A couple of the great benefits of polyethylene films are that films will flex and contour so they can be used on carpets and also hard surfaces. These films don't offer any impact protection and therefore are normally rated abbreviated term using 30 to 90 days only. Polyethylene films focus on one-time use and never use recycled materials which makes them an inadequate choice in sustainable protection. Protection films can be found in a number of adhesion "tack". Hard surface protection films will have a lower tack and color than carpet protection which needs a more aggressive glue to carry onto carpet fibers successfully.
Plywood and Masonite are generally used as protection on commercial projects with plenty of visitors. Masonite is often a wood product produced from wood fibers unlike plywood that's a genuine sheet of thin wood. Both plywood and Masonite are offered from the standard sized 4 feet by 8 feet and are higher priced per square feet than paper or polyethylene products. Masonite is frequently 1/8 or 1/4 inch thick. Plywood is often 1/4 inch to 3/4 inch thick. Both products provide impact protection with a various floor types and provide adequate protection against heavy equipment use or furniture moving. Both plywood and Masonite are breathable and reusable however they are bulky to handle and store. These wood sheets should be applied to the surface of a softer protection such as a rolled textile while they easily scratch flooring. These sheets are very effective to shield carpet because they prevent wrinkles when rolling heavy loads in the carpet. Plywood and Masonite tend not to offer moisture protection and can be harder to reduce to size than other protection types.
Textile products are commonly made of recycled cloth. Moreover, these rolled protection products usually have advantages for example skid resistant backings or breathable plastic liners. For wood floors, these specialty textile rolls are recommended because they are breathable, skid resistant, reusable, often leakproof and straightforward to cut to size.
To get more information about temporary carpet protection check our new web page: click for more info